4-Panel Poplar Shaker
10% OFFListed widths: 1′6″, 2′0″, 2′4″, 2′6″, 2′8″, 3′0″
Includes standard 4 9/16″ primed pre-hung jamb and ball-bearing hinges, per original listing.
Start My New Door ProjectExplore clean-lined 2-panel and 4-panel Shaker styles in paintable or stainable Poplar. Compare available widths, heights, and pre-hung options.
Looking for the other style? Poplar glass doors →
Prices and specifications retained from the existing Nick's page; confirm availability and current pricing before purchase.
Listed widths: 1′6″, 2′0″, 2′4″, 2′6″, 2′8″, 3′0″
Includes standard 4 9/16″ primed pre-hung jamb and ball-bearing hinges, per original listing.
Start My New Door ProjectListed widths: 1′6″, 2′0″, 2′4″, 2′6″, 2′8″, 3′0″
Includes standard 4 9/16″ primed pre-hung jamb and ball-bearing hinges, per original listing.
Start My New Door ProjectExplore finishing, casing, baseboard, handles, and hardware to complete your interior door project.
Standard primed jambs are included. Choose a Poplar jamb for a natural-wood look.

4 9/16″ engineered pre-primed jamb — included.

Add $30 at 6′8″ or $40 at 8′0″.

Add $30 at 6′8″ or $40 at 8′0″.
Other jamb widths may be available at an additional charge. The original listing quotes a 6 9/16″ primed jamb upgrade at $20 for 6′8″ doors or $30 for 8′0″ doors, and 4 9/16″ rabbet jambs at $99. Confirm any special configuration or upgrade price before ordering.
Ball-bearing hinges are included, with oil-rubbed bronze, satin nickel, or black listed. Double doors include ball catches. A locking T-astragal with flush bolts was listed as a $75 upgrade. Freight shipments may use knocked-down jambs.
Additional listed options include a bullnose kerf cut ($20), quick door hanger brackets ($6 for 6′8″, $8 for 8′0″), and door hardware. Contact Nick's to confirm fit and current availability.
Tell Nick's which Poplar door you want and share any opening measurements you have. A door specialist will review your selections and follow up. This request does not place an order.
Fields marked * are required. Opening measurements are optional if you are not sure.
Select the single-door slab width and height to estimate the door unit and rough opening sizes.
—
—
Guide only: These calculations use the same standard sizing rules as Nick's Door Size Calculator. Final sizing should still be reviewed before ordering.
Choose the opening type that matches where your width and height measurements were taken. You do not need to calculate another size.
Measure the door panel itself, from one edge to the other.
Measure the framed opening between the inside edges of the jambs.
If you aren't certain, choose I'm Not Sure, enter the measurements you have and upload a photo if possible.
Enter the width you actually measure. Do not round the number to a standard door size.
Measure straight across the door panel from edge to edge.
Measure between the inside edges of the jambs.
The same opening types apply to height. Measure vertically from the bottom to the top of the opening type you selected.
Measure from the top to the bottom edge of the door panel.
Measure from the underside of the header to the floor.
Enter the actual measurement, including fractions. Nick's will review it and determine the appropriate door or unit size.
Measure the jamb depth from the outside trim side to the inside trim side, as shown below.
Common sizes include 4 9/16″ and 6 9/16″, but custom dimensions are possible. If you're unsure, leave it blank and upload a close-up photo.
Use Nick's A–D handing diagram below. If you're uncertain, choose I'm Not Sure.
| Send us Finished Photos Get $100 Amazon Gift Card (Nicksbuilding.com doors only) ![]() |
Finishing and Staining for your Wood Doors ![]() |
Handlesets, Levers Locks and Deadbolts ![]() |
Interior Casing Baseboard, Crown and more ![]() |
| Is your door Right or Left Handed? |
Operable Sidelights Venting Sidelites ![]() |
3 Point Locks - Multi-point Door Locking System![]() |
Measure Your Doors Rough Opening ![]() |
We Make Custom Entry Doors and Glass Very Reasonable Pricing too! Call us for a quote 1-219-663-2279
Chicagoland Wood Doors Showroom is Open in Crown Point, Indiana - Dealers Welcome